상품명 | REDCON RM601 2.4GHz 6CH Micro Receiver - DSM2,DSMX 스팩트럼 호환 수신기 |
---|---|
판매가 | ₩24,800원 |
적립금 | 750원 |
제조사 | REDCON |
수량 | 품절 |
수량 | ![]() ![]() |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
REDCON RM601 2.4GHz 6CH Micro Receiver - DSM2,DSMX 스팩트럼 호환 수신기
- 스팩트럼 호환 수신기 DSM2,DSMX 6채널 수신기
Specifications:
Name: RM601
Channel: 6Channel+ PPM Port
Modulation: DSM2/DSMX
Band: 2.4GHz
Dimensions (W x Lx H): 38 x 20x5 mm
Weight: 4g
Voltage Range: 4-10v
Brown-Out Voltage: 4.0v (Always supply power above this voltage)
Antenna Length Main RX: 13.5cm (2)
Remote Control Range: 1200m-1500m (tested with JR DSX9)
Features
6 channels with PPM Out
Park-zone receiver
Servo Sync (feature does not work with module systems)
Preset failsafe system
Quick Connect
Compatibility (Spectrum and JR DSM2 /DSMX): DX6I,DX7,DX8, DSX7,DSX9 DSX11
High Working Voltage: 3.3- 10v
Control range up to 1.5KM
Binding Procedure
I. Put the binding harness into connector location marked BIND. Next connect power to receiver. Receiver LED should illuminate it means bind is accomplished
II. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter.
III. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. Failsafe should be programmed correctly .
IV. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on and connect battery into BIND channel is recommended. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.
Notes: Only one time bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed.
Package including:RM601 Receiver *1 p and bind Harness*1pc
Image